XT2500 Product Manual
Page 90 | 92
CONFIDENTIAL AND PROPRIETARY
Command
Function
:rycfg ...
Read system config
:wycfg ...
Write system config
:qycfg ...
Query parameter information
:uycfg revert
Revert all system configs in RAM (reload from FLASH; must be used before
:vycfg)
:vycfg
Save system configuration
:uyscr x <serial_port_id>
Run system script (after upload via xmodem)
:ryscr
Read system script (not the interpreter script)
:wyscr
Write a new system script (script created to recreate current parameters)
:wyval persist
Force a save of persist data
:ryval stack
Print out stack high water marks
:ryval time
Print out current network, gps, and system times
:qyi
Print out system information
:uycmd resync <new_
system_time_s>
Force system time to resync with available source. If time argument is
passed, use as new system time with lower priority than internal sources
:ryval hwid
Print out the hardware ID value
Defined HWIDs:
Hex
Description
0x01
Hwid_2400_A
0x02
Hwid_6370_A
0x03
Hwid_6374_A
0xff
Hwid_6300_B
:wyval hwid <value>
Set the hardware ID value
:wyval key <key_index>
<okok> <nkok> <oknk>
Change AES key, where key_index:
Index
Description
0
Update
1
Customer
2
Transport
:wyval ptk <key_index>
<plaintext_key>
Change AES key, where key_index:
Index
Description
0
Update
1
Customer
2
Transport
The desired key value is not encrypted. This command is only available via
physical connection to the device.