XT2500 Product Manual
Page 83 | 92
CONFIDENTIAL AND PROPRIETARY
Command
Function
:edm
Enable device debug channel monitoring
:ddm
Disable device debug channel monitoring
6.6.8. Flash
Command
Function
:efm
Enable Flash debug channel monitoring
:dfm
Disable Flash debug channel monitoring
:cfmem [all | <addr> <size>]
all = erase entire flash chip, <addr>,<size>
NOTE: Must be multiples of 0x1000
:rfmem <addr> <size>
Read <size> bytes of flash memory at address <addr>
NOTE: <addr> is in decimal
:wfmem <addr> "<hex_
string>"
Write "<hex_string>" to address <addr>
:qfmem
Query flash memory layoutNOTE: Only available on debug devices
:qfi
Query flash info (device type)
:qfrec
Query number of pending messages (records)
:rfrec
Read pending messages (records)
:wfrec "<hex_string>"
Write flash message (record)
:qftab <x>
Query flash table (x = 2 for packet log)
:sftab <x> <sz>
Fill flash table x leaving only sz bytes available
NOTE: Only available on engineering devices
:ufcmd reset
Erase pending messages
:ufcmd search <match> <size>
<offset>
Search flash for a match
6.6.9. Garmin
Command
Function
:enm
Enable Garmin debug channel monitoring
:dnm
Disable Garmin debug channel monitoring
:xnmsg <pid> "<ascii_hex>"
<flags>
Send a payload destined for Garmin device (needs script trigger/action)