Xinje XG Series Скачать руководство пользователя страница 9

Страница: 9 / 76

Preface

The following will introduce the content composition of this manual, the scope of application of the manual, the

conventions in the manual, the introduction of related manuals and the access to manual materials.

Application range of the manual

This manual is the hardware manual of XG series PLC products, which is applicable to XG1 and XG2 series

PLC.

1. XG series PLC features



Faster instruction processing speed

XG series PLC has faster instruction processing speed. XG1 series is equivalent to more than 2~3 times of XD3

series, and XG2 series is equivalent to 10 times of XDM series. The key performance is that the floating-point

instruction operation speed is significantly improved, and the scanning cycle unit is us.



Greater program capacity

XG series PLC has larger program capacity than XD series. XG1 series has 1MB program capacity, and XG2

series has 16MB program capacity.



Up to 16 XG series digital and analog value modules can be expanded

XG series PLC supports the expansion of modules, including digital value, analog value, temperature module,

etc., and the maximum number of extensions is 16.



Compatible with most common functions of XD series

In addition to the above advantages, XG series also supports most common functions of XD series PLC.



Compatible with the original program of XC series

Xinje PLC programming tool software can directly open the program of the original XC series PLC, but some

instructions of XG series and XC series may be involved in the program, and errors will be reported in red font

in Xinje PLC programming tool software. You only need to modify this part manually.



X-NET bus

XG series PLC supports X-NET fieldbus communication, which can realize fast and stable communication

between XG/XD/XL series PLC and TG/TN series HMI.



Ethernet communication

The built-in Ethernet port LAN1 (RJ45 standard) can stably and quickly realize program upload and download,

online monitoring and remote monitoring. After being connected to the LAN, it can communicate with other

Modbus-TCP devices in the LAN.



EtherCAT bus

XG2 series also has built-in Ethernet port LAN2 (RJ45 standard), which supports EtherCAT bus communication.

V1 version supports 32 maximum stations. At present, it only supports slave stations with EEPROM, such as

Xinje-DS5C, Panasonic EtherCAT servo, Kollmorgen servo, etc., but does not support Inovance servo.

2. XG series PLC unit

Series name

Product model

XG1

XG1-16T4

XG2

XG2-26T4

3. XG series PLC expansion modules

Содержание XG Series













































































Результаты поиска

Содержание XG Series

Отзывы:

Похожие инструкции для XG Series

Бренды по названию

Популярные бренды

Xinje XG Series, Руководство пользователя

Результаты поиска

Содержание XG Series

Отзывы:

Похожие инструкции для XG Series

Бренды по названию

Популярные бренды