Xinje XG Series, Руководство пользователя

Страница: 13 / 76

5
4000 points of power down holding process HS, 700000 points of non power down holding
intermediate relay M, 48000 points of power down holding intermediate relay HM, 1280 points of
input relay X, 1280 points of output relay Y, 50000 points of non power down holding timer T, 8000
points of power down holding timer HT, 50000 points of non power down holding counter C, 8000
points of power down holding counter HC, 700000 points of non power down holding data register D
100000 points power down hold data registers HD, 65536 points FD.

Two programming modes
XG series PLC supports two programming modes, namely command language programming and
ladder diagram programming. These two kinds of programming can be edited by switching with each
other.

Rich instruction set
Rich instructions. In addition to basic sequence control, data transmission and comparison, arithmetic
operations, data circulation and shift, it also supports special instructions such as pulse output,
high-speed counting, interrupt, PID, etc.

Real-time clock
XG series PLC has a built-in clock for time control.

Easy to install
XG series PLC is easy to install and installed directly on the guide rail.
Enhanced special features

X-NET bus
XG series PLC supports X-NET fieldbus communication, which can realize fast and stable
communication between XG series PLC and TG/TN series touch screen. XG1 supports X-NET
motion bus function and can realize synchronous motion control of 20-axis motor.

Ethernet communication
XG series PLC supports Ethernet communication, which can realize faster and more stable program/
data download and better real-time performance. It supports PLC access to the Internet, and realizes
remote search, online monitoring, uploading and downloading of PLC.

EtherCAT communication
XG2 series also has built-in Ethernet port LAN2 (RJ45 standard), which supports EtherCAT bus
communication. V1 version supports 32 maximum stations. At present, it only supports slave stations
with EEPROM, such as Xinje-DS5C, Panasonic EtherCAT servo, Kollmorgen servo, etc., but does
not support Inovance servo.

High speed counting, up to 80KHz/200KHz
The basic unit of XG series PLC is equipped with 4-channel, 2-phase high-speed counter and
high-speed counting comparator, which can count in single-phase and AB phase modes, and the
frequency can reach 80kHz/200kHz.

High speed pulse output, up to 100KHz
※
1
XG series PLC generally has 4 pulse output terminals, which can output pulses up to 100kHz
※
1

Interrupt function
XG series PLC has interrupt function, which is divided into external interrupt, timing interrupt and