![background image](http://html.mh-extra.com/html/xerox/workcentre-5020/workcentre-5020_system-administrator-manual_884272095.webp)
Paper Jams
95
If the paper is jammed around the Fuser
1) Pull down the latches.
2) Remove the jammed paper.
NOTE:
Do not leave any torn pieces of
paper inside the machine.
3) Return the latches back to their
original position.
4) Gently close the Left Side Cover.
If the paper is jammed inside the Left Side Cover
1) If the paper is jammed in the
location shown in the diagram,
remove the jammed paper by
pulling it upwards.
2) If the paper is jammed in the
location shown in the diagram,
remove the jammed paper by
pulling it upwards.
3) If the paper is jammed in the
location shown in the diagram, and
if the edge of the jammed paper is
not accessible to be pulled out, pull
up the green lever, and remove the
jammed paper.
NOTE:
If the paper is still jammed tightly,
even after pulling up the green lever, open
Access Cover 1. This may release the
jammed paper, allowing you to remove it.
4) Gently close the Left Side Cover.
Содержание WorkCentre 5020
