57
BOOK TOC
CHAPTER TOC
SEARCH
PREVIOUS PAGE
NEXT PAGE
SETTING AN OPTION
Press 2 to turn off RX Reduction.
Press 3 to enable vertical only RX Reduction. The machine will reduce an
incoming page containing overflow data along the vertical axis only. The
net effect will be a vertical compression of the image as shown below:
•
DISCARD SIZE - When receiving or copying a document as long as or
longer than the paper installed in your fax machine, you can set the fax
machine to discard any excess image at the bottom of the page, to fit into
the recording paper size.
If the received page is outside the margin you set, it will be printed on two
sheets of paper at the actual size.
If the data is within the margin, and the Auto Reduction feature is turned
ON, it will be reduced to fit into the appropriate size paper (Discard does
not take place). If the Auto Reduction feature is turned OFF or fails, the
data within the margin will be discarded.
Using the number keypad, enter the desired discard size (0-30 mm), and
press the Start
button to store your selection.
•
REDIAL INTERVAL - Your machine can automatically redial a remote fax
machine if it was busy or does not answer the first call.
Enter the number of minutes (from 1 to 15) using the number keypad.
•
REDIALS - Enter the number of redial attempts (from 0 to 2) you wish
your machine to make.
Original
Received Data
