Xerox WorkCentre 490cx Скачать руководство пользователя

Страница: 213 / 258

216

BOOK TOC

CHAPTER TOC

SEARCH

PREVIOUS PAGE

NEXT PAGE

MANAGING THE INK CARTRIDGES

Replacing the Ink Cartridge

The ink cartridge includes the ink supply and the print head. Each time you
replace the ink cartridge, you are replacing the print head as well.

When you notice the print becomes light or INK LOW appears in the display,
replace your cartridge.

Note:

When INK LOW appears during PC printing, the machine continues

printing. After PC printing is completed, replace the ink cartridge.

Note:

Your machine counts and keeps ink low counts for both ink

cartridges.

To replace the ink cartridge, perform the following steps:

1. Open the control panel (1) and the cartridge compartment cover (2).

2. Pull the handle of the ink cartridge(s) you want to replace toward you until

there is a click. Remove the ink cartridge(s).

3. Remove a new ink cartridge from its packaging and carefully remove the

tape covering the print head. Hold the ink cartridge by the colored tab or
black areas only. Do not touch the copper area.

4. Insert the ink cartridge in the cartridge holder, then push the ink cartridge

firmly to the rear of the machine until it clicks into place.

If the ink cartridge moves loosely in the carrier, it has not clicked into place.
Repeat this step.

5. Close the cover and the control panel.

Содержание WorkCentre 490cx



































































































































































































































































Результаты поиска

Содержание WorkCentre 490cx

Отзывы:

Похожие инструкции для WorkCentre 490cx

Бренды по названию

Популярные бренды

Xerox WorkCentre 490cx, Онлайн руководство пользователя

Результаты поиска

Содержание WorkCentre 490cx

Отзывы:

Похожие инструкции для WorkCentre 490cx

Бренды по названию

Популярные бренды