7. The dry ink / toner material inside the new cartridge is compact. Loosen and
redistribute the dry ink / toner material before placing into the dry ink / toner slot:
a) With one hand on either side of the cartridge, vigorously shake and rotate the
new cartridge up and down and then left and right for 30 seconds.
b) Test whether the dry ink / toner material is distributed sufficiently by turning the
white auger on the end of the cartridge.
c) If the auger does not turn easily, continue to shake the cartridge and loosen the
dry ink / toner material. When the auger does turn without resistance, the dry
ink / toner cartridge is ready to be installed.
8. Position the cartridge with the white auger end facing the press. Install the new dry
ink / toner cartridge by gently and evenly sliding the cartridge into the press until it
stops.
9. Close the dry ink / toner cover. If the cover does not close completely, make sure the
cartridge is in the lock position and is installed into the appropriate dry ink / toner
location.
Replacing the Dry Ink / Toner Waste Bottle
The Dry Ink / Toner Waste Bottle collects dry ink / toner that accumulates during the
printing process. When the Waste bottle is full, a message displays on the press touch
screen informing you to exchange the full bottle with an empty one.
The press contains one waste bottle located at the front of the press behind the front
center door. When removing a full Dry Ink / Toner Waste Bottle, SLOWLY pull it out of
the press. This will prevent any dry ink / toner from spilling out of the bottle.
Note
After you replace the Dry Ink / Toner Waste Bottle, the system automatically resets the
High Frequency Service Item (HFSI) usage counter for this CRU component to zero (0).
Check the Consumables Supply screen to verify the reset.
1. Ensure that the press is stopped (not running any jobs).
2. Open the front center cover and locate the waste bottle at the bottom right of the
press near the door.
Xerox
®
Versant
®
2100 Press
9-12
User Guide
Maintenance
Содержание Versant 2100
