2. Using the handles, position the Belt Module into the Fuser Assembly using the 3
alignment points. The Belt Module can be moved front to back and side to side to
achieve the proper placement.
Make sure the fuser is seated correctly and completely or the Fuser Top Cover will
not close and machine damage may result.
3. To validate the Belt Module is installed properly, gently close the Fuser Top Cover. If
it closes completely, the module is installed correctly. If it does not close, try to reinstall
the Fuser Belt Module again. Leave the Top Cover open.
4. Replace the wire bundle into the harness clip. Reconnect the three white connectors
at the front of the Fuser by pushing into place.
5. Push the black connector in until it clicks into place.
Note
The three white connectors are keyed and cannot be mixed up. The smallest connector
is in the back and the largest is in the front.
Xerox
®
Versant
®
2100 Press
9-26
User Guide
Maintenance
Содержание Versant 2100
