1.
No staple
2.
Bent staple
3.
One side of staple rising up
4.
Staple bent in reverse direction
5.
Flattened staple
6.
Entire staple rising up
7.
Staple rising up with the center pressed in
If the output is stapled as shown in the figure above, contact our Customer Support
Center.
Note
Depending on the type of paper that is being stapled, the stapled nails may be bent. If
the bent nails are stuck inside the machine, they may eventually cause paper jams.
Remove the bent staple when opening the staple cartridge cover. If you do not remove
the bent staple, a staple jam may occur as a result. Use the staple cartridge cover only
when removing the bent staple.
Staple Jams in the Standard Staple Cartridge
Perform the following procedure to clear staple jams in the standard staple cartridge.
Note
Always check inside the finisher for any individual staples or staple remnants.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Grasp the Staple Cartridge handle located at R1, and pull out the staple cartridge
from the finisher.
4. Check the inside of the finisher for any remaining staples, and if necessary, remove
them.
18-31
Xerox
®
Versant
®
2100 Press
User Guide
Standard Finisher Plus
Содержание Versant 2100
