Note
Notice that the small white connector with the two black wires does not need to be
connected for this configuration.
6. Gently close the Fuser Top Cover. Reinstall the two larger screws using the T15 Torx
driver.
Note
You must reinstall the Front Fuser Cover.
7. Replace and secure the Fuser Front Cover with the smaller T10 screw.
Warning
You must push the drawer in. Pulling the drawer further out will disengage it from
the rails resulting in damage to the drawer and possible personal injury.
8. To push in and close the Transfer Drawer, press the rail tabs on each side of the
drawer with your fingers as you gently push the drawer into the press.
9. Latch the Transfer Drawer and close the Front Covers to complete the procedure.
10. Ask the administrator to reset the High Frequency Service Item (HFSI) count for this
newly-replaced CRU component. The HFSI components that need to be reset at the
press touch screen are:
• Belt Module 1 (No Fuser connector)
• Belt Module 2 (Fuser connector 1)
• Belt Module 3 (Fuser connector 2)
Extending Fuser Life
While the press is installed with only one type of fuser (standard type), the system is
able to detect 3 different fuser width settings. To optimize your image quality, you can
exchange the standard fuser with up to 3 different width fusers. Use the different jumper
resistance connectors to identify the specific fuser and match up with the paper width
NVM settings in the following table. Also, a clip on the Front Cover of the fuser identifies
the width of the fuser being used.
9-27
Xerox
®
Versant
®
2100 Press
User Guide
Maintenance
Содержание Versant 2100
