Xerox Phaser EX7750, Руководство по управлению заданиями

Страница: 63 / 216

3
3-1 Starting up and logging in
This chapter describes how to use Command WorkStation and Command
WorkStation LE to monitor and manage job flow on the EX7750. Once you log in to
the EX7750 with Operator privileges, you can view jobs held on the EX7750 and issue
commands to release the jobs for processing or printing. You can also modify job
properties, such as FreeForm variable data printing requirements, paper settings,
finishing options, and other print option settings. After a job has printed successfully,
you can store it in the job archive, and view a record of its activity in the Job Log.
For background information about job flow and job management, see Chapter 1 . For
an introduction to the Command WorkStation and Command WorkStation LE user
interfaces, see
Chapter 2 .
N
OTE
:
Unless otherwise specified, information in this chapter applies to both
Command WorkStation and Command WorkStation LE. Sections that apply
exclusively to Command WorkStation are denoted by an asterisk (*). Sections that
apply exclusively to Command WorkStation LE are denoted by a dagger (†). In cases
where the two applications are nearly identical, only Command WorkStation
illustrations are shown.
Starting up and logging in
To begin working with Command WorkStation or Command WorkStation LE, start
the application and log in to the EX7750.
Chapter 3:
Using Command
WorkStation and
Command
WorkStation LE