![background image](http://html2.mh-extra.com/html/xerox/phaser-8560mfp/phaser-8560mfp_administrators-manual_4115725051.webp)
Configuring SNMP
System Administrator Guide
4-20
Configuring the SNMP Access Control List
These settings include:
To set up a list of hosts that are authorized to access the printer using SNMP:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
Protocol
folder on the left navigation panel.
5.
Select
SNMP
.
6.
If prompted, enter your Admin or Key User name and password.
7.
Enter up to ten host IP addresses in the
SNMP Access Control List
field. Separate entries
with a blank or a comma, specify ranges with a hypen (-), and use an asterisk (*) to
represent a group of numbers (e.g., 13.62.156.*).
8.
Click the
Save Changes
button.
See also:
About Access Control Lists
on page 4-4
Disabling SNMP
If you are not using SNMP, disable it to prevent unauthorized access through applications that
use these protocols. If you disable SNMP, the following driver features are also disabled:
■
PrintingScout alerts
■
Walk-Up Printing Installer
■
Smart Trays
■
PhaserSMART
■
Auto supplies ordering
■
Consumable levels
■
Warning and error status
■
Synchronization with installed options, such as hard drive, memory, and extra trays
To disable SNMP:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
Protocols
folder on the left navigation panel.
5.
Select
SNMP
.
6.
If prompted, enter your Admin or Key User name and password.
7.
Click the
Disable SNMP Now
button.
8.
Click the
Save Changes
button.