Protocol Control
System Administrator Guide
3-7
8.
If you select
Off
, follow the instructions in the
TCP/IP Settings
section to manually enter
the printer’s TCP/IP information.
■
Enter the TFTP server IP address or hostname in the
TFTP Server Name
field.
■
Enter the pathname of the configuration file in the
Boot File Name
field.
9.
Under
DDNS/WINS Settings
, in the
DDNS
box, select one of the following:
■
On
: The printer registers its IP name and address so other devices on the network can
refer to it by name.
■
Off
: The printer does not register its IP name and address. If
DDNS
is
Off
, these
values may be set by
BOOTP/DHCP
if enabled.
10.
If you select
On
, follow the instructions in
DDNS/WINS Settings
to manually enter
settings to identify the printer. For more information, including a description of the fields,
click the
Help
button in CentreWare IS to view the online help.
11.
Click the
Save Changes
button.
Port 9100
To change Port 9100 settings:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
Protocols
folder on the left navigation panel.
5.
Select
Port 9100
.
6.
If prompted, enter your Admin or Key User name and password.
7.
Select
On
or
Off
in the
Port 9100
box.
8.
If you select
On
, follow the instructions on the page to select Port 9100 settings. For more
information, including a description of the fields, click the
Help
button in CentreWare IS
to view the online help.
9.
Click the
Save Changes
button.
