![background image](http://html2.mh-extra.com/html/xerox/phaser-8560mfp/phaser-8560mfp_administrators-manual_4115725086.webp)
Phaser PJL Commands
System Administrator Guide
B-7
@PJL SET/DEFAULT
XPCLTRAYSWITCH=
value
ON, OFF
Switches trays when a tray goes
empty. If AutoSelect is chosen as
the paper source (tray) in PCL,
then tray switching is always
active, regardless of the value.
When the current tray goes
empty, the printer attempts to
switch to another tray containing
the same size and type of paper.
This command only takes effect
when a specific tray, such as
Tray 2, is selected in the job.
When this command is ON, tray
switching still occurs when the
tray goes empty. When this
command is OFF, no switching
occurs and the user is prompted
to load paper.
@PJL DEFAULT XPCLPAPERSRC
x
=
y
x
is 0, 1, 2, 3, 4, 5,
6, 7, 8, 20, 21, 22,
23, which is the
number in the
<Esc>&l#H tray
selection
commands.
y
is -1 for
AutoSelect, 0 for
the current tray
(eject page), 1 for
Tray 1, 2 for Tray 2,
etc., and 99 for the
factory defaults.
Overrides the tray selected in the
<Esc>&l#H PCL tray selection
commands.
@PJL SET/DEFAULT XSLIPSHEET
OFF, JOB, SET,
PAGE
Inserts a slip sheet between the
selected option.
@PJL SET XSLIPSHEETSOURCE
TRAYX
Selects the slip sheet from the
specified tray.
* See the
HP Printer Job Language Technical Reference
for the values.
PJL Command
Values
Description