Xerox PHASER 8560MFP, Руководство администратора

Страница: 49 / 98

Configuring SNMP
System Administrator Guide
4-18
Configuring SNMP v3
When configuring SNMP v3, you can set up:
■
Administrative, Key, Any User, and Driver accounts with Privacy and Authentication Keys
associated with each account.
■
SNMP user read and write access.
■ An access control list that limits SNMP printer access to the specific hosts. See
Configuring the SNMP Access Control List on page 4-20.
To configure and enable SNMP v3:
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties .
4. Select the Protocols folder on the left navigation panel.
5. Select SNMP .
6. If prompted, enter your Admin or Key User name and password.
7. On the SNMP Configuration page, click the Configure SNMP v3 button.
8. Click the Configure Account(s) button. A series of pages display that enable you to
configure SNMP v3 and the Administrative User , Key User , and Any User/Driver
settings. The first page displays Administrative User account information after the account
has been created.
9. Do one of the following:
■ To create the Administrative User account and to enable SNMP v3, enter a user name
or accept the default name
admin , and then click the Create button.
■ To configure the Key User and other account settings, click the Next button.
■
To delete the Administrative User account and disable SNMP v3, click the
Delete button. This also deletes all other accounts, including the Key User and Any
User settings.
The Administrative User Account Settings
These settings include:
■
User Name : The Administrative User account name defined on the Configure SNMP v3:
Administrative User Account page.
■
Authentication Protocol : The protocol associated with the Authentication Key; selected
on the Configure SNMP v3: Administrative User Account page.
■ Authentication Key : The Authentication Key defined on the Configure SNMP v3:
Administrative User Account page is displayed as a row of asterisks (*) here.
■
Privacy Protocol : The protocol associated with the Privacy Key; selected on the
Configure SNMP v3 Administrative User Account page.
■
Privacy Key : The Privacy Key defined on the Configure SNMP v3: Administrative
User Account page is displayed as a row of asterisks (*) here.
■ MIB Access : The Administrative User account's MIB access permissions, which are set to
Read/Write by default.