Cloning
System Administrator Guide
3-13
Cloning
Cloning enables you to configure one printer and then copy that configuration to another
printer on the same network. You can access cloning using CentreWare IS or CentreWare Web.
■
Using CentreWare IS, you can select the settings you want to clone from one printer to
another printer.
■
Using CentreWare Web, you can select the settings you want to clone from one printer to
one or more printers.
To clone settings from one printer to another printer using CentreWare IS:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select
Clone Settings
.
5.
Enter your Admin or Key User name and password, if prompted.
6.
On the
Clone Printer
page, select the settings you want to clone from the source printer or
click
Check All
to select all the settings.
7.
Enter the IP address or DNS Name of the destination printer in the
IP Address
or
DNS
Name
field.
8.
(Optional) To assign a printer name to the destination printer, enter this name in the
Printer Name (SNMP System Name)
field.
9.
If the destination printer is located in a different domain/zone, modify the information in
the
EtherTalk Zone
and/or
IP Domain Name
fields.
10.
Click the
Clone Selected Settings
button.
A list of the selected settings to clone is displayed.
11.
Click the
Clone
button to clone the destination printer with the selected settings from the
source printer.
To access CentreWare Web, go to
www.xerox.com/office/pmtools
.
