Xerox Phaser 6280, Руководство по обслуживанию, Страница: 304 / 672

4-16 Phaser 6280 Color Laser Printer Service Manual
General Troubleshooting
K Mode Clutch
On K Mode Clutch On Tests the K Mode Clutch.
NVM Settings <Press the Up or Down
button to move from one
item to another>
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
move to the execution
level> Edits, saves, loads, and prints NVRAM
information.
Edit NVM Edit NVM
■
Ad0000=00000000*
■
Please wait
<Press the Left or Right
button to move the
cursor>
<Press the Up or Down
button to change the
value at the cursor>
<Press the Set button to
save the value in Engine
NVM>
<Press the Cancel button
to move one level up the
menu>
Displays the current NVRAM value.
Use this function to edit NVRAM
information.
Save NVM to
ESS Save NVM to ESS
■
SaveNVM to ESS OK?
■
Processing
■
Saved
■
Please wait
<Press the Set button to
save the value in the
Controller NVM>
<Press the Cancel button
to move one level up the
menu>
Saves the NVRAM information of the
Engine in the Controller. NVRAM
addresses to be saved are as follows:
1000-10FF, Total: 256Byte
Note: Information saved in the
Controller NVM can be initialized using
Clear All NVM .
Load NVM Load NVM
■
LoadNVM from ESS
OK?
■
Processing
■
Loaded
■
Please wait
<Press the Set button to
load the value saved in
the Controller NVM to the
Engine>
<Press the Cancel button
to move one level up the
menu>
Loads NVRAM information of the
Engine saved in the Controller into the
Engine.
1000-10FF / 1100-11FF / 1200-12FF
Note: Information saved in the
Controller NVM can be initialized using
Clear All NVM .
Service Diagnostic Test Table (continued)
Test Control Panel Display Test Description