Xerox Phaser 6280, Руководство по обслуживанию

Страница: 196 / 672

3-60 Phaser 6280 Color Laser Printer Service Manual
Error Messages and Codes
4 Perform the Toner Motor test: Service
Mode > Engine Diag > Motor Test >
Toner Motor .
While testing the Toner Motor, close
the Interlock Harness.
■
Yellow Toner Motor (page 4-47)
■
Magenta Toner Motor (page 4-49)
■
Cyan Toner Motor (page 4-49)
■
Black Toner Motor (page 4-50)
Check the gear
of the Auger for
damage. If the
gear is
damaged,
replace the
Dispenser
Assembly
(page 8-56). Go to step 5.
5 1. Check the Dispenser wiring harness
connectors.
■
Yellow: P/J18 and P/J181
■
Magenta: P/J18 and P/J182
■
Black: P/J18 and P/J183
■
Cyan: P/J18 and P/J184
2. Are the connectors securely
connected?
Go to step 6. Reconnect the
connectors.
Go to step 6.
6 Does the error still occur? Go to step 7. Complete.
7 Check the Top LV Harness for
continuity.
1. Disconnect P/J Harnesses.
■
Yellow: P/J18 from the MCU Board
and P/J181 from the Dispenser
Assembly
■
Magenta: P/J18 from the MCU
Board and P/J182 from the
Dispenser Assembly
■
Black: P/J18 from the MCU Board
and P/J183 from the Dispenser
Assembly
■
Cyan: P/J18 from the MCU Board
and P/J184 from the Dispenser
Assembly
2. Check continuity between P/J
connectors:
■
Yellow: P/J18 <=> P/J181
■
Magenta: P/J18 <=> P/J182
■
Black: P/J18 <=> P/J183
■
Cyan: P/J18 <=> P/J184
Go to step 8. Complete.
8 Check the Dispenser Assembly signal.
1. Disconnect P/J18 from the MCU
Board.
2. When the Interlock Switch is
activated, is there +24 V across:
■
Ground <=> P/J18-A1/P/J18-A2
pin (Yellow)
■
Ground <=> P/J18-A7/P/J18-A8
pin (Magenta)
■
Ground <=> P/J18-B1/P/J18-B2
pin (Black)
■
Ground <=> P/J18-B7/P/J18-B8
pin (Cyan)
Replace the
Dispenser
Assembly
(page 8-56). Replace the
MCU Board
(page 8-86).
Troubleshooting Procedure Table (continued)
Step Actions and Questions Yes No