Configuring the Product
Phaser® 6115MFP Multifunction Product
3-12
Setting the Media Mismatch Behavior
If you select a media type in the printer driver that is different than the paper source set on the
products control panel, you can choose whether or not the product continues to print job.
Using the Control Panel
1.
From the main screen, press the
Menu/Select
button to enter the
Machine Setup
menu.
2.
Scroll to the
Auto Continue
menu,
or press number
10
on the alphanumeric keypad, and
then press the
Menu/Select
button.
3.
Select from the following options by using the
Right Arrow
or
Left Arrow
buttons.
■
ON
: The product continues printing when a media size error occurs.
■
OFF
: The product stops printing when a media size error occurs.
4.
Press the
Menu/Select
button to save the settings.
Using the MFP ControlCentre
1.
Open the MCC, connect to your product and download the current .dat file.
2.
Click the
Menu
button.
3.
Select the
Machine Setup
tab.
4.
Check
Auto
Continue
, and then click
OK
.
5.
Click the
Upload
button to save the new settings to the product.
Note:
Cannot be set from CentreWare IS.
