Configuring the Product
Phaser® 6115MFP Multifunction Product
3-6
Setting the Auto Panel Reset
Auto panel reset returns the control panel to its default settings after the product has been idle
for the specified a specified amount of time.
Using the Control Panel
1.
From the main screen, press the
Menu/Select
button to enter the
Machine Setup
menu.
2.
Scroll to the
Auto Panel Reset
menu, or press number
1
on the alphanumeric keypad, and
then press the
Menu/Select
button.
3.
Use the
Right Arrow
or
Left Arrow
button to select
ON
or
OFF
, and then press the
Menu/Select
button.
OFF
: The control panel auto reset operation is not performed.
ON
: The control panel will be reset to its default values at the intervals selected by the
user.
4.
If you select
ON
, select from
0.5, 1, 2, 3, 4, 5
minutes for the product to be idle before the
control panel is reset to its default values, and then press the
Menu/Select
button to save
the settings.
Using CentreWare IS
1.
Launch your web browser.
2.
Enter the product’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click the
Login
button and log in as an administrator.
4.
Under
Administration
, click the
Reset
button.
5.
Select
Reset All Factory Settings
, and then click
Save Changes
.
Using the MFP ControlCentre
1.
Open the MCC, connect to your product and download the current .dat file.
2.
Click the
Menu
button.
3.
Select the
Machine Setup
tab.
4.
Select the desired amount of time from the
Auto Panel Reset
drop-down list, and then
click
OK
.
5.
Click the
Upload
button to save the new settings to the product.
