Printing on Specialty Media
Phaser® 5550 Printer
4-37
2.
Insert the transparencies (long-edge feed preferred) into Tray 2, 3, 4, or 5.
Note:
Do not load paper above the fill line inside the tray.
3.
Adjust the paper guides to the size of the transparencies.
4.
If prompted on the control panel, press the
OK
button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
a.
Select
Change setup
, and then press the
OK
button.
b.
Select
Transparency
, and then press the
OK
button.
c.
Select the paper size, and then press the
OK
button to save your selection.
5.
In the printer driver, select either
Transparency
as the paper type or the tray you loaded as
the paper source.
5550-143
Содержание Phaser 5550
Страница 114: ...Using the Stapler Phaser 5550 Printer 4 53 7 Close Door G 5550 018 E A B C D...
Страница 149: ...Clearing Paper Jams Phaser 5550 Printer 6 5 3 Close Door A D A E 5550 003...
Страница 154: ...Clearing Paper Jams Phaser 5550 Printer 6 10 4 Close Door B 5 Open Door C 5550 006 B C 5550 007 B C...
Страница 165: ...Clearing Paper Jams Phaser 5550 Printer 6 21 4 Close Door E 5 Close Door A 5550 012 E D A E 5550 003...
