Loading Paper
Phaser® 5550 Printer
4-13
■
Place pre-punched paper with the holes toward the
back
of the printer.
■
Place letterhead (or the top of the page) to enter the printer last.
5.
If prompted on the control panel, press the
OK
button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
a.
Select
Change setup
, and then press the
OK
button.
b.
Select the paper type, and then press the
OK
button.
c.
Select the paper size, and then press the
OK
button to save your selection.
6.
In the printer driver, select either the paper type or
Tray 1 (MPT)
as the paper source.
Loading Paper in Trays 2-5 for Single-Sided Printing
Trays 2-5 can be used for all paper, transparencies, specialty media, and many sizes.
Caution:
If you change the type of paper in
a tray, you
must
change the paper type on the
control panel to match the paper that you
loaded.
If you fail to do this, print-quality
problems can occur and the fuser can be
damaged.
5550-138
5550-123
Содержание Phaser 5550
Страница 114: ...Using the Stapler Phaser 5550 Printer 4 53 7 Close Door G 5550 018 E A B C D...
Страница 149: ...Clearing Paper Jams Phaser 5550 Printer 6 5 3 Close Door A D A E 5550 003...
Страница 154: ...Clearing Paper Jams Phaser 5550 Printer 6 10 4 Close Door B 5 Open Door C 5550 006 B C 5550 007 B C...
Страница 165: ...Clearing Paper Jams Phaser 5550 Printer 6 21 4 Close Door E 5 Close Door A 5550 012 E D A E 5550 003...
