Print-Quality Problems
Phaser® 5550 Printer
6-58
Print-Quality Problems
Your printer is designed to produce consistently high-quality prints. If you observe
print-quality problems, use the information in this topic to diagnose the problem.
For best results, use only Xerox Printing Media. For information on supported paper types and
weights, see
Supported Paper and Media
on page 4-2.
Caution:
Damage caused by using unsupported paper, transparencies, and other specialty
media is not covered by the Xerox warranty, service agreement, or Total Satisfaction
Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada.
Coverage may vary outside these areas; please contact your local representative for details.
Light Prints
The overall image is lighter than normal.
Possible Causes
Solutions
The paper may be damp.
Replace the paper.
You may be using Draft mode.
Turn off Draft mode.
The toner level may be low.
If the toner cartridge is low on toner, replace it.
Drum cartridge near end of life.
Replace drum cartridge.
Содержание Phaser 5550
Страница 114: ...Using the Stapler Phaser 5550 Printer 4 53 7 Close Door G 5550 018 E A B C D...
Страница 149: ...Clearing Paper Jams Phaser 5550 Printer 6 5 3 Close Door A D A E 5550 003...
Страница 154: ...Clearing Paper Jams Phaser 5550 Printer 6 10 4 Close Door B 5 Open Door C 5550 006 B C 5550 007 B C...
Страница 165: ...Clearing Paper Jams Phaser 5550 Printer 6 21 4 Close Door E 5 Close Door A 5550 012 E D A E 5550 003...
