Using the Stapler
Phaser® 5550 Printer
4-50
Using the Stapler
Stapling Options
Several stapling options are available in the Phaser 5550 printer driver:
■
No Stapling
: This is the default option. When selected, prints are not stapled.
■
1 Staple
: Inserts one staple in each set of copies.
■
2 Staples
: Inserts two staples in each set of copies.
■
Advanced Stapling
: Provides options for controlling staple placement.
To select a stapling option in a supported driver:
Note:
You can use the control panel or CentreWare IS to set the default stapling option.
Low Staples Behavior
When the printer detects a low quantity of staples, a 15 minute delay is started during which
three things can happen:
■
The print job can be resumed without staples.
■
The user can refill the staple cartridge, and then continue the print job.
■
The print job can be cancelled.
If no action is taken by the end of the 15 minutes, the print job will resume, run the staples out,
and continue to print without stapling.
Operating System
Steps
Windows 2000 or later
On the
Output Options
tab, select an option from the
Stapling
drop-down list.
Mac OS X (version 10.3
and higher) driver
In the
dialog box, select
Finishing Options
from the drop-down
list, and then select the stapling option.
Содержание Phaser 5550
Страница 114: ...Using the Stapler Phaser 5550 Printer 4 53 7 Close Door G 5550 018 E A B C D...
Страница 149: ...Clearing Paper Jams Phaser 5550 Printer 6 5 3 Close Door A D A E 5550 003...
Страница 154: ...Clearing Paper Jams Phaser 5550 Printer 6 10 4 Close Door B 5 Open Door C 5550 006 B C 5550 007 B C...
Страница 165: ...Clearing Paper Jams Phaser 5550 Printer 6 21 4 Close Door E 5 Close Door A 5550 012 E D A E 5550 003...
