Loading Paper
Phaser® 5550 Printer
4-17
5.
Push the tray completely into the printer.
6.
If prompted on the control panel, press the
OK
button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
a.
Select
Change setup
, and then press the
OK
button.
b.
Select the paper type, and then press the
OK
button.
c.
Select the paper size, and then press the
OK
button to save your selection.
7.
In the printer driver, select either the paper type or the tray you loaded as the paper source.
Loading Paper in Tray 6 for Single-Sided Printing
Use Tray 6 as a high capacity feeder for Letter, A4, Executive, and B5 JIS paper. Paper can
only be loaded long-edge feed in Tray 6.
1.
Pull out the tray.
5550-032
5550-112
Содержание Phaser 5550
Страница 114: ...Using the Stapler Phaser 5550 Printer 4 53 7 Close Door G 5550 018 E A B C D...
Страница 149: ...Clearing Paper Jams Phaser 5550 Printer 6 5 3 Close Door A D A E 5550 003...
Страница 154: ...Clearing Paper Jams Phaser 5550 Printer 6 10 4 Close Door B 5 Open Door C 5550 006 B C 5550 007 B C...
Страница 165: ...Clearing Paper Jams Phaser 5550 Printer 6 21 4 Close Door E 5 Close Door A 5550 012 E D A E 5550 003...
