10
.2
<Installing accessories>
Setting the memory in the PostScript printer
properties (Phaser 3428/DN only)
After installing the memory DIMM, you need to select it in the printer
properties of the PostScript printer driver so that you can use it.
1
Make sure that the PostScript printer driver is installed in your
computer. To installing the PostScript printer driver, you need to
select
Custom
and put a check mark on the PostScript printer
driver. See the
Software Section
.
2
Click the Windows
Start
menu.
3
For Windows 95/98/Me/NT4.0/2000, select
Settings
and then
Printers
.
For Windows XP/2003, select
Printers and Faxes
.
4
Select the
Xerox Phaser 3428 PS
printer.
5
Click the right mouse button on the printer icon and select
Properties
.
6
For Windows 95/98/Me, select
Device Option
tab.
For Windows NT4.0/2000/XP/2003, select
Device Settings
tab.
7
Select the amount of memory you installed from
Printer Memory
in
the
Installable Option
section.
For Windows 98, select
Installable Option
→
VMOption
→
change setting for:NMOption
→
change memory
.
8
Click
OK
.
