Xerox DocuPrint N17, Руководство по обслуживанию

Страница: 537 / 558

6/98
Xerox DocuPrint N17 Service Manual 12-19 High Capacity Feeder Option
12.3.9 Feed Roll Assembly
Removal
1. Slide the feeder drawer open to lower the elevator tray.
2. Disconnect the AC Power Cord from the High Capacity Feeder.
3. Remove the two Retainer Clips on the feed roll shaft.
4. Slide the Right Feed Roll Arm to the right.
NOTE: Before removing the Feed Roll in the next step, rotate the Feed Roll on the shaft and note which
way the one-way clutch grips the shaft. The new Feed Roll must be installed in this manner.
5. Remove the Feed Roll from the shaft.
Replacement
1. Perform the removal steps in reverse order.
NOTE: The Feed Roll has an integral one-way mechanical clutch. When installing a new Feed Roll,
ensure that it freely rotates as shown in the illustration.
3
Feed Roll Assembly is shown
removed for clarity.
Drawer removed
for clarity.
Freely spins this direction
Grips the shaft this direction
4
5
REP_07
www.printcopy.info
www.printcopy.info