Xerox DocuPrint C55, Дополнительное руководство

Страница: 102 / 395

W I N D O W S 24
Windows NT 4.0 Network
Introduction
Your printer can be installed on a Windows NT network using one of
three methods:
•
TCP/IP protocol
•
DLC/LLC protocol
•
AppleTalk protocol
The Preliminary Steps given below must be accomplished for all
printers regardless of the protocol that is being used. Then, the Quick
Install Steps will detail the installation based on the protocol used on
your network.
Preliminary Steps
1. Install the Network Interface Card in the printer (if not already
installed). Details are in this document in the section entitled
Installation of the Network Interface Card.
2. Connect appropriate cabling from printer to network. Details are
in this document in the section entitled Network Cable
Connection.
3. Print the Print Settings page. Details are in this document in the
section entitled Print The Print Settings Page. Retain this page
for reference.
4. Check the Print Settings page and verify that both the desired
protocol and connector are enabled.
5. Proceed to the Quick Install Steps for your network protocol.