Xerox DocuPrint C2428, Руководство пользователя, Страница: 223 / 283

7.4 Printing Report/List
223
7
Dai
ly Cont
ro
l
■
Abnormal End of Job
[Job Processing Status] may indicate the following abnormal end message.
Error Message Cause and Action
Print Instruction Fail Cause: Combination of print parameters is incorrect such
that [Paper Source] is set to [Auto] though [Custom
Size] is specified.
Action: Check the print data. If above case is applied, select
Tray 5 (bypass tray).
Out of ART EX Memory Cause: Print data cannot be processed because the
necessary memory is insufficient.
Action: Increase available memory.
Out of Page Buffer Cause: PCL print data cannot be processed because the
print page buffer is insufficient.
Action: Take one of the following actions.
●
When [Print Mode] is set to [High Resolution], set
it to [High Quality]. If the status is still not
improved, set it to [Standard].
●
Use Print Page Mode.
● Increase the capacity of print page buffer.
● Add memory.
For information about [Print Mode] and [Print Page
Mode], refer to the On-line Help for the printer driver.
Other Error Cause: An error occurred during print processing. It may
be caused by the following.
When [Paper Priority] of [Print Settings] in the
Common Menu is set to [off] for all paper types,
print is instructed with the Auto Tray Switch
specified.
Action: Set [Paper Priority] to other than [Off] for any
desired paper type when printing with the Auto
Tray Switch specified.
“Paper Priority” (P.150)
PDL Auto Switch Fail Cause: When Print Mode is set to [Auto], print language
cannot be automatically selected.
It may be caused by the following.
(1)PostScript data is sent though no PostScript
Software Kit is installed.
(2)PDF file is sent to this printer by using LPR
when PostScript Software Kit (optional) is
installed but not a Hard Disk Drive.
Action: In case of (1), PostScript Software Kit is required.
In case of (2), Hard Disk Drive and memory of 384
MB or more are required.