Xerox DocuPrint C2428, Руководство пользователя, Страница: 146 / 283

5.2 Description of Common Menu
146
5
Settin
g
Control
Panel
InternetServices
Set whether to use the Internet Services.
When [Enable] is set, you can check the printer and the job status and change the settings of the
printer on the web browser using CentreWare Internet Services. Default is [Enable].
To enable Internet services, you need to set the IP address on both the computer and this printer.
WINS Server
■
Get DHCP Address
Set to obtain the IP address, necessary for using the Windows Internet Service (WINS), from the
DHCP server, automatically or manually Check with the network system administrator to set the IP
address manually. Default is [On].
The setting screen of the IP address will be indicated after changing to [Off] from [On], then set the settings
manually.
■
Primary IP Address, Secondary IP Address
*3 (P.155)
You can use these features to check the IP Address, which has been obtained automatically, and to
set the IP Address manually. Enter the IP address in a xxx.xxx.xxx.xxx format. xxx refers to the
value between 0 to 255. In case the primary IP address is invalid, the secondary IP address will also
be invalid.
A wrong IP address may cause trouble to the entire network.
Ethernet
Set the communication speed and the type of the connector for the Ethernet interface.
[Auto] (default)
Switch 100BASE-TX and 10BASE-T automatically.
[100BASE-TX]
Select this if you decide to use 100BASE-TX.
[10BASE-T]
Select this if you decide to use 100BASE-TX.
IPX/SPXFrameType
Set the active frame type of IPX/SPX.
[Auto] (default)
Set the frame type automatically.
[Ethernet II]
Use the frame type specified for Ethernet.
[Ethernet 802.3]
Use the frame type specified for IEEE802.3.
[Ethernet 802.2]
Use the frame type specified for IEEE802.3/IEEE802.2.
[Ethernet SNAP]
Use the frame type specified for IEEE802.3/IEEE802.2/SNAP.