Xerox DocuPrint C2428, Руководство пользователя, Страница: 153 / 283

5.2 Description of Common Menu
153
5
Settin
g
Control
Panel
Buffer Size
Set the memory capacity by each interface for reception buffer capacity, which is the area to store
transported data from the computer temporarily. Set the spool, setting area, and the memory capacity
for LPD, SMB, and IPP.
You can change the receiving buffer capacity to status and destination. As the receiving buffer
capacity is increased, the print data processed in this printer will be released quickly by the
application program. The maximum setting value varies depending on the available memory.
●
When the port status is set to [Disable], no feature is indicated.
●
Depending on transferred data, it may not be released quickly if the memory capacity is increased.
■
Parallel, NetWare Memory, IPP Memory, EtherTalk Memory, USB Memory, Port9100
Memory
Allocate the memory capacity in the range of 64 to 1,024 KB, incremented by 32 KB. Default is
[64K] for Parallel and USB, [256K] for all other types of memory. The [EtherTalk Memory] is
indicated when the PostScript
Software Kit is installed. If the memory is greater than 384 MB, the
EtherTalk memory is in a range of 1024 to 2048.
The [IPP Memory] is indicated only when a Hard Disk Drive (optional) is not installed.
■
LPD Spool and SMB Spool
[Off] (default)
Print data is not spooled. While the printer is under printing process in LPD and SMB from a
computer, any data with the same interface from other computer cannot be received.
Set the allocation of the memory capacity of the receiving buffer specified for LPD and SMB in the
range of 64 to 1024 KB, incremented by 32 KB. Default is [256K]. If the memory is greater than 384
MB, the LPD is in a range of 1024 to 2048.
[Hard Disk]
Spool processing is done. The receiving buffer for the spool process uses the Hard Disk Drive. This
item is available when the Hard Disk Drive (optional) is installed.
[Memory]
Spool process is done. The receiving buffer for the spool process uses the memory.
Set the memory capacity of the receiving buffer for the spool process in the range of 0.5 to 32.00
MB, incremented by 0.25 MB. Default is [1.00M]. Any print data larger than the memory capacity
specified cannot be received. In this case, select [Hard Disk Drive] or [Off].
For Windows 2000, if the LPR bite count is set to disabled, when any print data larger than the memory capacity
specified in [Memory] is transmitted, the job may be transmitted to the printer repeatedly.
In this case, select the [Port] tab on the printer driver properties, and set the LPR bite count to enabled, or set the
capacity of the memory the spool to a larger value than the capacity of the document data.
■
IPP Spool
This item is displayed when the Hard Disk Drive (optional) is installed.
[Off] (default)
Print data is not spooled. While the printer is under printing process in LPD and SMB from a
computer, any data with the same interface from an other computer cannot be received.
Set the allocation of the memory capacity of the reception buffer specified for IPP in the range of 64
to 1,024 KB, incremented by 32 KB. Default is [256K].
[Hard Disk]
Spool processing is done. The receiving buffer for the spool process uses the Hard Disk Drive.