Xerox DocuPrint C2428, Руководство пользователя, Страница: 138 / 283

5.2 Description of Common Menu
138
5
Settin
g
Control
Panel
■
Adobe Protocol
Set the communication protocol for PostScript. This item is available when PostScript Software Kit
is installed.
[Normal] (default)
Set when the communication protocol is ASCII format.
[Binary]
Set when the communication protocol is in Binary format. According to data, the processing of
printing in Binary format may be faster than that of [Normal].
[TBCP]
Set when both ASCII format and Binary format are installed in one communication protocol, and to
switch by a specified control code.
●
Set proper form according to data output by the printer driver in the computer.
●
Use this menu as a default, [Normal] for normal operation.
●
These settings can be used only when printing with PostScript.
■
Auto Eject Time
*3 (P.155)
Set the time to output the remaining data in the printer, in case data transmission is interrupted.
You can select from 5 to 1275 seconds, per 5 seconds. Default is [30Secs]. When the next data is not
received during this time, it is recognized as the end of the job.
■
Bi-directional
Enable or disable bi-directional communications (IEEE1284) for the parallel interface. Default is
[Enable].
■
Input Prime
Set the INPUT_PRIME control system (the hardware re-set system) enabled or disabled. The re-set
operation is processed after the printer receives the INPUT_PRIME signals. Default is [Enable].
According to your computer system, the feature set in the operation panel may not be reflected in the printing
result, as the INPUT_PRIME signals are sent to re-set the process for every print job. In this case, the settings
on the menu screen can be reflected by specifying [Disable].
Use this setting with the Emulation.