Xerox DocuPrint C2428, Руководство пользователя, Страница: 137 / 283

5.2 Description of Common Menu
137
5
Settin
g
Control
Panel
5.2.2
The System Administrator Menu
The menu for configuring the settings for Network/Port, System Settings (such
as alert tone, power saver mode), Printer Settings, Allocate Memory, Image
Quality, initializing the printer’s settings or the hard disk, removal of form data.
Network/Port
The menu to configure necessary settings for the type of interface connected to
the computer and communication in the network.
Parallel
Set when using a parallel interface.
■
Port Status
Set the status to [Enable] or [Disable] in parallel interface when switching off the power. Default is
[Enable], which allows the use of the parallel interface.
Set the status of ports that are not used to [Disabled] or change the memory allocation capacity, in case of
insufficient memory.
■
Print Mode
*1 (P.155)
Set the process method (targeted print language) of the print data.
[Auto] (default)
The proper process is automatically selected according to the language of the data received from the
computer.
[PS] [HP-GL/2] [PCL] [TIFF]
Data received from the computer is processed. [PS] is available only when the PostScript Software
Kit is installed.
■
PJL
*2 (P.155)
You can use the PJL command with this printer, which does not depend on any print language. The
PJL command controls the print job, and is necessary when you use the printer driver. Setting the
status of the PJL command sent from the computer to enabled or disabled. By using the PJL
command, you can select the print language for the next data, even if the printer is under another
process in any print language. Set [Enable] for normal use. Default is [Enable].