Xerox DocuPrint C2428, Руководство пользователя, Страница: 140 / 283

5.2 Description of Common Menu
140
5
Settin
g
Control
Panel
NetWare
Set when using NetWare.
■
Port Status
Set the status of the NetWare port to enabled or disabled when switching off the power. Default is
[Disable]. Set to [Enable] when you use NetWare.
When activating the port, the status of the port may be set to [Disable] due to insufficient memory. Set the
unused port status to [Disable] or change the memory allocation capacity, in case of insufficient memory.
■
Transpt Protocol
Set the Protocol of the transport layers of the NetWare. You can use either IPX/SPX or TCP/IP, or
both of them. Default is [TCP/IP, IPX/SPX].
IP Address is needed on both the computer and the machine to use TCP/IP.
■
Print Mode
*1 (P.155)
Set the process method (targeted print language) of the print data.
[Auto] (default)
The proper process is automatically selected according to the language of the data received from the
computer.
[PS] [HP-GL/2] [PCL] [TIFF]
Each piece of data received from the computer is processed. [PS] is indicated only when the
PostScript Software Kit is installed.
■
PJL
*2 (P.155)
You can use the PJL command with this printer, which does not depend on any print language. The
PJL command controls the print job, and is necessary when you use the printer driver. Setting the
status of the PJL command sent from the computer to enabled or disabled. By using the PJL
command, you can select the print language for the next data, even if the printer is under another
process in any print language. Set [Enable] for normal use. Default is [Enable].
■
No. of Search
*3 (P.155)
Set the number of times to search for the file server.
You can set from 1 to 100 per 1 time, or limitless. The searching interval is at 1 minute increments.
Default is [No Limit].
■
TBCP Filter
Set the TBCP filter to enabled or disabled, while data from the PostScript is processed. This item is
available when the PostScript Software Kit (optional) is installed. Default is [Disable].