background image

 

Copyright © 2000 Electronics For Imaging All rights reserved. 

 

This publication is protected by copyright, and all rights are reserved. No part of it may be 
reproduced or transmitted in any form or by any means for any purpose without express prior 
written consent from Electronics For Imaging except as expressly permitted herein. 
Information in this document is subject to change without notice and does not represent a 
commitment on the part of Electronics For Imaging. 

The software described in this publication is furnished under license and may only be used or 
copied in accordance with the terms of such license. 

Patents: 5,867,179; 5,835,788; 5,666,436; 5,553,200; 5,543,940; 5,537,516; 5,517,334; 
5,506,946;5,424,754; 5,343,311; 5,212,546; 4,941,038; 4,837,722; 4,500,919, D406,117

 

Printed in the United States of America on recycled paper.

Restricted Rights Legends 

 

For defense agencies: Restricted Rights Legend. Use, reproduction, or disclosure is subject to 
restrictions set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer 
Software clause at 252.227.7013. 

For civilian agencies: Restricted Rights Legend. Use, reproduction, or disclosure is subject to 
restrictions set forth in subparagraph (a) through (d) of the commercial Computer Software 
Restricted Rights clause at 52.227-19 and the limitations set forth in Electronics For Imaging 
standard commercial agreement for this software. Unpublished rights reserved under the 
copyright laws of the United States. 

 

FCC Information

 

WARNING: FCC Regulations state that any unauthorized changes or modifications to this 
equipment not expressly approved by the manufacturer could void the user’s authority to 
operate this equipment. 

 

Industry Canada Class B Notice

 

This Class B digital apparatus meets all the requirements of the Canadian Interference-Causing 
Equipment Regulations.

 

Avis de Conformation Classe B de l’Industrie Canada 

 

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel 
brouilleur du Canada.

 

RFI Compliance Notice

 

This equipment has been tested concerning compliance with the relevant RFI protection 
requirements both individually and on system level (to simulate normal operation conditions). 
However, it is possible that these RFI Requirements are not met under certain unfavorable 
conditions in other installations. It is the user who is responsible for compliance of his 
particular installation.

Dieses Geraet wurde einzeln sowohl als auch in einer Anlage, die einen normalen 
Anwendungsfall nachbildet, auf die Einhaltung der Funk-entstoerbestimmungen geprueft. Es 
ist jedoch moeglich, dass die Funk-enstoerbestimmungen unter unguenstigen Umstaenden bei 
anderen Geraetekombinationen nicht eingehalten werden. Fuer die Einhaltung der Funk-
entstoerbestimmungen seigner gesamten Anlage, in der dieses Geraet betrieben wird, ist der 
Betreiber verantwortlich.

Compliance with applicable regulations depends on the use of shielded cables. It is the user 
who is responsible for procuring the appropriate cables.

Einhaltung mit betreffenden Bestimmungen kommt darauf an, dass geschirmte Ausfuhrungen 
gebraucht werden. Fuer die beschaffung richtiger Ausfuhrungen ist der Betreiber 
verantwortlich.

 

Software License Agreement

 

Before using the Software, please carefully read the following terms and conditions. BY USING 
THIS SOFTWARE, YOU SIGNIFY THAT YOU HAVE ACCEPTED THE TERMS OF 
THIS AGREEMENT. If you cannot or do not accept these terms, you may return the entire 
package within ten (10) days to the Distributor or Dealer from which you obtained them for 
a full refund.

Electronics For Imaging grants to you a non-exclusive, non-transferable license to use the 
software and accompanying documentation (“Software”) included with the Fiery X12 you 

 

have purchased, including without limitation the PostScript

 

®

 

 software provided by Adobe 

Systems Incorporated.

You may:

a. use the Software solely for your own customary business purposes and solely with Fiery X12;

b. use the digitally-encoded machine-readable outline and bitmap programs (“Font Programs”) 
provided with Fiery X12 in a special encrypted format (“Coded Font Programs”) to reproduce 

and display designs, styles, weights, and versions of letters, numerals, characters and symbols 
(“Typefaces”) solely for your own customary business purposes on the display window of the 
Fiery X12 or monitor used with Fiery X12;

c. use the trademarks used by Electronics For Imaging to identify the Coded Font Programs and 
Typefaces reproduced therefrom (“Trademarks”); and

d. assign your rights under this Agreement to a transferee of all of your right, title and interest in 
and to Fiery X12 provided the transferee agrees to be bound by all of the terms and conditions of 
this Agreement.

You may not:

a. make use of the Software, directly or indirectly, to print bitmap images with print resolutions of 
600 dots per inch or greater, or to generate fonts or typefaces for use other than with Fiery X12;

b. make or have made, or permit to be made, any copies of the Software, Coded Font Programs, 
accompanying documentation or portions thereof, except as necessary for use with the Fiery X12 
unit purchased by you; provided, however, that under no circumstances may you make or have 
made, or permit to be made, any copies of that certain portion of the Software which has been 
included on the Fiery X12 hard disk drive. You may not copy the documentation; 

c. attempt to alter, disassemble, decrypt or reverse engineer the Software, Coded Font Programs or 
accompanying documentation.

d. rent or lease the Software.

 

Proprietary Rights

 

You acknowledge that the Software, Coded Font Programs, Typefaces, Trademarks and 
accompanying documentation are proprietary to Electronics For Imaging and its suppliers and 
that title and other intellectual property rights therein remain with Electronics For Imaging and 
its suppliers. Except as stated above, this Agreement does not grant you any right to patents, 
copyrights, trade secrets, trademarks (whether registered or unregistered), or any other rights, 
franchises or licenses in respect of the Software, Coded Font Programs, Typefaces, Trademarks or 
accompanying documentation. You may not adapt or use any trademark or trade name which is 
likely to be similar to or confusing with that of Electronics For Imaging or any of its suppliers or 
take any other action which impairs or reduces the trademark rights of Electronics For Imaging or 
its suppliers. The trademarks may only be used to identify printed output produced by the Coded 
Font Programs. At the reasonable request of Electronics For Imaging, you must supply samples of 
any Typeface identified with a trademark.

 

Confidentiality

 

You agree to hold the Software and Coded Font Programs in confidence, disclosing the Software 
and Coded Font Programs only to authorized users having a need to use the Software and Coded 
Font Programs as permitted by this Agreement and to take all reasonable precautions to prevent 
disclosure to other parties.

 

Remedies

 

Unauthorized use, copying or disclosure of the Software, Coded Font Programs, Typefaces, 
Trademarks or accompanying documentation will result in automatic termination of this license 
and will make available to Electronics For Imaging other legal remedies.

 

Limited Warranty And Disclaimer

 

Electronics For Imaging warrants that, for a period of ninety (90) days from the date of delivery 
to you, the Software under normal use will perform without significant errors that make it 
unusable. Electronics For Imaging’s entire liability and your exclusive remedy under this warranty 
(which is subject to you returning Fiery X12 to Electronics For Imaging or an authorized dealer) 
will be, at Electronics For Imaging’s option, to use reasonable commercial efforts to attempt to 
correct or work around errors, to replace the Software with functionally equivalent software, or to 
refund the purchase price and terminate this Agreement. Some states do not allow limitations on 
duration of implied warranty, so the above limitation may not apply to you.

Except for the above express limited warranty, Electronics For Imaging makes and you receive no 
warranties or conditions on the Products, express, implied, or statutory, and Electronics For 
Imaging specifically disclaims any implied warranty or condition of merchantability or fitness for 
a particular purpose.

For warranty service, please contact your authorized service/support center.

EXCEPT FOR THE ABOVE EXPRESS LIMITED WARRANTY, ELECTRONICS FOR 
IMAGING MAKES AND YOU RECEIVE NO WARRANTIES OR CONDITIONS ON 
THE SOFTWARE OR CODED FONT PROGRAMS, EXPRESS, IMPLIED, STATUTORY, 
OR IN ANY OTHER PROVISION OF THIS AGREEMENT OR COMMUNICATION 
WITH YOU, AND ELECTRONICS FOR IMAGING SPECIFICALLY DISCLAIMS ANY 
IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE. Electronics For Imaging does not warrant that the operation of the 
software will be uninterrupted or error free or that the Software will meet your specific 
requirements.

 

Limitation Of Liability

 

IN NO EVENT WILL ELECTRONICS FOR IMAGING OR ITS SUPPLIERS BE LIABLE 
FOR ANY DAMAGES, INCLUDING LOSS OF DATA, LOST PROFITS, COST OF COVER 

Содержание DOCUCOLOR 12













Отзывы: