Xerox DOCUCOLOR 12, Инструкция по использованию

Страница: 6 / 12

2
Using the Fiery X12/Fiery X40 Advanced Controller Interface Kit
Procedures
Before you replace the BIOS chip you need to access the Service menu in order to begin
installation.
T
O ACCESS THE
S
ERVICE MENU FROM THE
C
ONTROL
P
ANEL
1. Select Shut Down and then Reboot System from the Functions menu.
2. While the Fiery X12/Fiery X40 is running the startup diagnostics, hold down the fourth
line selection button on the Control Panel to access the Service menu.
If you do not press the fourth line selection button before the end of the diagnostics, the
Fiery X12/Fiery X40 continues startup and you must restart the system and try again.
3. At the Service menu select Install Option.
Hold down line selection button to
access Service menu
Install Software
Restore Backup
Install Option
Start System
Service
Select