Xerox DOCUCOLOR 12, Инструкция по использованию

Страница: 7 / 12

3
Procedures
4. At the next screen, select Yes and then OK to begin installation.
Processing is displayed on the screen. Do not power off the system at this point; doing so
may damage the BIOS chip making it difficult to boot the Fiery X12/Fiery X40.
Once the system is finished processing a screen is displayed indicating it is now safe to
power off the system and replace the BIOS chip with the one provided in this kit.
5. At the following screen power off the Fiery X12/Fiery X40 using the power switch on the
back panel (press 0).
6. Disconnect all cables from the back of the Fiery X12/Fiery X40.
Always obtain permission from the network administrator before you take the Fiery X12/
Fiery X40 off the network.
Is option kit
ready?
Yes
OK
Install Option
Power off the unit.
Replace BIOS chip.
Power on unit.