Xerox DOCUCOLOR 12, Инструкция по использованию, Страница: 8 / 12

4
Using the Fiery X12/Fiery X40 Advanced Controller Interface Kit
T
O OPEN THE
F
IERY
X12/F
IERY
X40
1. Make sure you have powered off the Fiery X12/Fiery X40 and removed all the cables from
the back.
2. Remove the screw from the back panel and set it aside (see below).
3. Grasp the side panel at the top on both sides and gently pull it away from the tray.
4. Lift off the side panel.
5. The Fiery X12/Fiery X40 internal components are now accessible. Attach an ESD wrist
strap before handling internal parts.
N
OTE
:
It is easier to service components inside the tray if the Fiery X12/Fiery X40 is
positioned so that it is resting on its side and the components inside the tray are facing
up.
Back panel screw
Side panel
Front panel