Xerox DOCUCOLOR 12, Инструкция по использованию

Страница: 11 / 12

7
Procedures
9. Connect the other end of the monitor power cable to a wall outlet.
10. Once all the cables are connected to the back of the, power on the monitor and the
Fiery X12/Fiery X40.
11. Once the Control Panel screen indicates that the upgrade is complete, press any key on
the Control Panel to reboot the system.
If the screen indicates that the system was not upgraded, check to make sure you installed
the correct BIOS chip on the motherboard. If the screen still indicates that the system
was not upgraded, restore the previous configuration and contact your service support
center.