manualshive.com logo in svg

Xerox 4213, Руководство пользователя

Поделиться
Скачать
Xerox 4213 Скачать руководство пользователя страница 296

XEROX COAX/TWINAX OPTION

B

22. Press the Test button to display the currently selected

language option.  The display reads:

LANGUAGE
US ENGLISH

If the display does not read the required language, press the Last
Page button until it does.

Note:   Refer to the Main Menu map for the XES language options
available to you.

D

23. Press the Select button to select the language.  An asterisk

appears next to your selection.

A

24. Press and release the Menu button to display the XES

emulation menu option.  The display reads:

XES
LANGUAGE

A

25. Press and release the Menu button to display the emulation

option.  The display reads:

EMULATION
XES

A

26. Press and release the Menu button to display the Main Menu

option.  The display reads:

MAIN MENU
EMULATION

H

27. Press the Online button to place the printer online.  The

online indicator light is lit.

Note:  At this point it may be wise to use the SAVE DEFAULTS
option to save any changes made to the printer configuration
settings.  By doing this, when your system is switched off and
then on again, the configuration returns to that which you had
previously saved.  Refer to “Saving User Defaults” section in this
guide.

Coax versus Twinax

If the 4213 is used in the Coax environment, refer to “Using the
IBM Coax interface“ section.

Refer to ”Using the IBM Twinax interface“ section if the 4213 is
used in the Twinax environment.

XEROX 4213 LASER PRINTER USER GUIDE

A3-25

Содержание 4213


























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды