Xerox 4213, Руководство пользователя

Страница: 212 / 441

TROUBLESHOOTING
Table 6-1. Deterioration in print quality problems and
possible solutions (continued)
Problem Check point Possible solution
Skewed image
•
Print is slanted.
Is the paper tray correctly
installed? No? Install the paper tray
correctly.
Is the paper correctly loaded
in the paper tray? Curl side
up. No? Correct the paper position in
the paper tray.
•
When feeding from the
adjustable cassette and
making 2-sided prints one
side do not have the
image correctly located on
the page Is the paper correctly loaded
in the HCF (curl side down)
Does the loaded paper size
match the menu selection?
No? Correct the paper position in
the HCF.
No? Match the paper size and the
menu selection.
Does the cassette type
position of the magnet match
the menu selection? No? Match the type magnet
position and the menu
selection.
Character line limit
You may lose text if you exceed 300 characters or character-like
functions (such as backspace or overstrike). This loss occurs at
the end of a portrait line or at the beginning of a landscape line.
This applies to full page and partial imaging.
You may either lose data or break the page early if you place
more than 300 graphics, rules, or characters into a very narrow
horizontal band across the page. The page complexity
determines if the recovery after the page break is complete. This
applies only to partial imaging.
You may also break the page early due to real time imaging
problems if thousands of characters are present on a page. You
can avoid this by not having thousands of small size type (6
point) characters filling a page. This applies only to partial
imaging.
XEROX 4213 LASER PRINTER USER GUIDE 6-5