Copyright | C6AM User Manual, Version 1.2.2
36
6005
Electromagnetic lock
check failure
Please contact XCHARGE
EVSE
Table 6.1
Notes:
When scanning QR-code or sweeping NFC/RFID card to start charging and system shows self-
test failure: due to the difference of EVs inlets, plug the socket again to ensure that the charging
plug is in the right position and lock functions well.
7. Maintenance
WARNING
Mortal danger due to electrocution!
The contact with high power parts can result in electric shock, burns or death. Before
working, please put on the required protection device such as Protective clothing and
gloves:
- The door should be open after the upstream circuit breaker and isolation switch in the
distribution cabinet is closed.
- Make sure that the power supply is disconnected while doing maintenance.
Make sure to put the charging plug back on the right side of the plug holder after charging and
ensure that the charging cable is naturally drooping.
Regularly check the charging station and charging cable. If damage is found, you can contact the
customer service for replacement or maintenance.
7.1
Cleaning of the Cabinet
The C6AM Charge Station is powder coated. This coating must be kept in good condition;
We suggest that C6AM needs to be cleaned two times every year (adjusted according to
the actual situation);
Remove rough dirt by spraying with low-pressure tap water instead of high-pressure jet;
Apply a neutral or weak alkaline cleaning solution and let it soak;
Only use cleaning agents with a PH value between 6 and 8;
Do not use cleaning agents with abrasive components;
Do not use abrasive tools;
Remove dirt by hand with a non-woven nylon hand pad;
Do a regular check on the coating for damage;
Call the customer service if any damage on coating occurs.
