Copyright | C6AM User Manual, Version 1.2.2
24
Insert the forklift from the bottom facing the plug side (CCS or CHAdeMo) of charging
station and move the charging station to the desired installation location. As shown in
Figure 4.6.1 the width of fork is up to 420mm and the length of fork is min. 600mm.
Please move the charging station with the utmost caution!
Figure 4.6.1
The charging station can also be transported and aligned by crane. This can be
achieved through four eye-bolts included in delivery, which can be screwed into the
tapped holes on the top.
Note:
Only 60kW and 120kW C6AM are only to be transported by crane for a short distance
(for example from floor to Foundation). For 150kW because of the weight, a forklift is
suggested by XCHARGE to apply. Please ensure that the body of C6AM stays stable
during movement through crane or forklift to avoid the possible swinging, which may
cause damage to the charger;
The cable entrance on the bottom of charger is divided into three inlets, of which the
first is for the power cable, the second is for the LAN cable and the third is for the signal
cable. In order to prevent animals from entering the charging station to cause
unnecessary damage, it should be sealed with a barrier plate and three waterproof cable
glands.
615mm
420mm
