EG102 User’s Guide
46
Advanced
This page allows you to configure advanced parameters for wireless communication.
Figure 52: Wireless Setting – Advanced
Global Setting
Enable
AP Isolation
if you do not want AP to be able to communicate with each
other.
Set the W
ireless Communication Band
. If you do not know it, please it as default.
Select the channel from the list
Set
the
Wireless Communication Rate
, AUTO means to use the highest rate if
possible)
Set
the
Rate for Multicast Packets
, AUTO means to use the highest if possible.
Set
the
Basic Rate
Set
the
Fragmentation Threshold
values from 256 to 2364 bytes. If the value is
too small, it may cause a result in poor performance.
Set
the
RTS (Ready to Send) Threshold
Set
DTIM Interval.
DTIM stands for Delivery Traffic Indication Message. This is a
beacon and is a countdown informing wireless clients of the next window for
listening to broadcast and multicast messages. It is a wake-up interval for clients
in power-saving mode.
Set
Beacon Interval
. The interval in milliseconds between beacon transmissions.
