EG102 User’s Guide
56
Static Configuration
Secret Number is usually an extra service and customers are charged an additional
monthly fee. It must be possible to provision from remote if CLIR is enabled or
disabled for each outgoing phone call.
On per call basis
Caller Line Identification Restriction (CLIR) enables a calling party to prevent
presentation, on a call by call basis, of his number to the called party. This is in
Sweden a regulatory requirement for an operator to provide.
Activation: # 31 # is dialed immediately before the called party number.
Call Waiting
Call Waiting (CW) enables a busy customer to be notified of a new incoming call that
is in a waiting position. Then customer has the choice of accepting, rejecting or
ignoring the waiting call, making use of switching orders based on R
(R means the
hook flash button)
.
Call Waiting customer configuration
Call Waiting is permanently enabled or disabled until disabled / enabled again. It is not
on a per call basis.
Activation: * 43 #
Deactivation: # 43 #
Force Busy
To reject the new call without answering it: R (dial tone) 0. The “R (dial tone) 0” means
to press hook flash button, hear dial tone and then press 0 button. The CPE will send
a Busy signal to the calling party.
R0 shall also temporarily deactivate the call waiting service for the rest of the active
call. When the subscriber hangs up the service shall automatically be activated again.
Pickup and Release old
To release the old call and take the new call: R (dial tone) 1
Pickup and put old on hold
To place the old (current) call on hold and take the new call: R (dial tone) 2
Switch between 2 active calls
To switch between the old and the new call: R (dial tone) 2
