EG102 User’s Guide
51
Global Setting:
Select to Enable this line or not
Enter
UID (User Name)
for Line 1 or Line 2
Enter
the
Password
Enter
the
Display Name
which will be shown in the called party when you call out.
Enter
the
Login ID
if your login username is not the UID.
Enter
the
Primary Proxy Server
IP address or domain name and also port
number
Enter
the
Second Proxy Server
IP address or domain name and also port
number is applicable
Enter
the
Registrar Server
IP address or domain name and also port number if
applicable.
Enter
the
Outbound Proxy Server
IP address or domain name and also port
number if applicable.
Enter
the
Register Expiry Number
of seconds which the device will try to register
in SIP server during the time period.
Select
the
NAT Keep-alive Method
from the list
Enter
the
SIP Proxy Require
if necessary
Select
the
User Prefered Audio Codec
from the list
Enter
the
RTP Base number
Check to enable
Use STUN for NAT Mapping to pass through NAT
Check to enable
VIA rport
Check to enable
DNS SVR
Click
Save
to save the configuration
RTP/Codec Setup
This page allows you to setup the parameters of Real Time Protocol (RTP) and voice
codec to control the quality of voice connection.
