EG102 User’s Guide
28
Click
Add
to add a rule of Incoming IP Filtering.
Check
Remove
and click
Remove
to remove the specified entry.
Figure 31: Add - Incoming IP Filter Setup
Global Setting
Enter
the
Filter Name
Select
the
Protocol
from the selection list.
Enter
the
Source IP Address
and
Subnet Mask (range of IP addresses)
of packet
Enter
the
one port or multi ports
(port range)
Enter
the
Destination IP Address
and
Subnet Mask (range of IP addresses)
of
packet
Enter
the
one port or multi ports
(port range)
Select
the
WAN interfaces
which will be applied with this incoming IP filter rule.
Click
Save/Apply
