Xantrex XW-SCP 865-1050, Руководство пользователя

Страница: 48 / 76

Operation
4–2 975-0298-01-01
System Modes
The system modes described in this section affect the performance and
behavior of the System Control Panel and all other Xanbus-enabled
devices. You will have to change the system mode when putting your
system in storage or when installing a new Xanbus-enabled device.
Changing System Modes
System modes are changed using the System Settings menu (see “Using
the System Settings Menu” on page 3–12). The system modes are:
• Operating
• Standby.
Operating Mode
The default state of the System Control Panel is Operating mode. In
Operating mode, the System Control Panel communicates with other
Xanbus-enabled devices and displays all the network information it is
configured to display.
Standby Mode
While in Standby mode, the System Control Panel remains powered,
“listening” and reporting its status to the network. However, the output
power of all Xanbus-enabled devices is disabled and all inverting,
charging, and generator starting activity stops. Selecting Standby mode
stops the generator (if it is running and a Xantrex Automatic Generator
Start is part of the system) and puts the System Control Panel (and all
Xanbus-enabled devices) into Standby mode.
When to use Use Standby mode when you are adding or removing devices from the
network. Authorized service personnel must also put the network in
Standby mode before performing software upgrades and diagnostics.
To put the power system into Standby mode:
1. On the System Settings menu, highlight “System Mode,” and press
Enter.
2. Select “Standby” and press Enter.
To return to Operating mode:
1. On the System Settings menu, highlight “System Mode,” and press
Enter.
2. Select “Operating” and press Enter.