Xantrex Freedom SW 815-2024, Руководство пользователя

Страница: 56 / 96

42 Freedom SW Owner’s Guide
Configuring the Freedom SW using the SCP
the Xanbus SCP displays the basic settings by default. To view the
advanced settings, you must perform a special keypress (see “Selecting
Advanced Settings From the Device Setup Screen” on page 43).
The Freedom SW advanced settings include menus for configuring:
•
Inverter settings (see page 46).
• Charger settings (see page 48).
• AC transfer limit settings (see page 52).
• Generator support settings (see page 53).
• Stacking operation, including customizing the default model name of
the Freedom SW, and setting its network device number. Setting the
device number is important when multiple Freedom SWs are on the
Xanbus network and sharing connections such as AC loads, utility
grid, and generator. The device number is also used when configuring
paralleled Freedom SWs for Master-Slave operation (see page 54).
• Restoring default settings (see page 57) and other advanced features
(see page 57).
Freedom SW advanced menu screen lists status information and settings
which require that you understand and plan for the changes you make. You
may not have to adjust these settings as part of regular operation.
The SCP shows the Freedom SW basic menu by default. To view the
advanced settings menu, you have to activate it by following the procedure
below.
To select the Advanced Settings menu screen:
1. On the
FSW3012 00:Setup
screen (Figure 21), press the
Enter
, Up
arrow, Down arrow buttons simultaneously to make Advanced
Settings appear in the list.
2. On the
FSW3012 00:Setup
screen, press the down arrow button until
Advanced Settings
is highlighted.
NOTE:
This keypress enables the advanced settings for every device in the
system. After performing the keypress,
Advanced Settings
appears in
the list and
Basic Settings
disappears.
FIRE AND ELECTRICAL SHOCK HAZARD
The advanced settings are intended for qualified installation/service
personnel only. Before changing advanced settings, you must be familiar
with the settings and the system-wide impact of changing those settings.
Setting parameters incorrectly could damage connected equipment (such
as batteries) or could severely affect the performance of your system.
Incorrect charging configuration can lead to battery damage and risk of
fire.
Failure to follow these instructions can result in minor or moderate
injury.
Freedom SW 3K2K InvChg Owners Guide.book Page 42 Wednesday, October 9, 2013 1:34 PM